Get This Free Cheat Sheet Guaranteed To Help Your Next Mix

Wednesday, January 20, 2016

EQing For Size

EQing for Size image
Figure 7.5: EQing for Size
Usually when we EQ elements of a mix we're doing it to make everything fit. That means juggling frequencies so that there are no clashes, and making mix elements smaller. This happens when we have large mixes with lots of tracks.

Sometimes there aren't that many tracks to worry about though (like for live recordings, or blues or jazz), so we more interested in increasing the sonic size of the tracks. Here's an excerpt from my Mixing Engineer's Handbook that describes how to do that in 4 easy steps.

"Making a sound bigger or larger than life usually comes from the addition of bass and sub-bass frequencies in the 40Hz to 250Hz range, although most will come from an area just below 100Hz, a region just above 100Hz, or both.

For use the method, the low frequency band of your EQ must be sweepable.
1. Set the Boost/Cut control to a moderate level of Boost (8 or 10 dB should work).

2. Sweep through the frequencies in the bass band until you find the frequency where the sound has the desired amount of fullness.

3. Adjust the amount of boost to taste. Be aware that too much boost will make the sound muddy.

4. Go to the frequency either 1/2 or twice the frequency that you used in #2 and add an amount of that frequency as well. Example: If your frequency in #2 was 120Hz, go to 60Hz and add a dB or so as well. If your frequency was 50Hz, go to 100Hz and add a bit there (see Figure 7.5)."



No comments:

LinkWithin

Related Posts Plugin for WordPress, Blogger...